Loosen bulk solids that have solidified during storage and shipment
The Hydraulic Bulk Bag Conditioner (photo) features two hydraulic rams with specially contoured end plates to press opposing sides of bulk bags. An optional hydraulically actuated, variable-height turntable allows in-frame bag rotation and conditioning of bulk bags at varying heights. "The new conditioner is intended for bulk bags containing hygroscopic chemicals, certain types of spice blends, heat-sensitive products and other materials prone to solidifying to the point at which pneumatically actuated flow-promotion accessories integral to bulk bag dischargers are inefficient," says David Boger, sales manager. - Flexicon, Bethlehem, Pa.
edlinks.chemengonline.com/6893-331
A quick-clean screener for thorough washdowns
The Centri-Sifter centrifugal screener model "GO" (photo) features a cantilevered shaft with two, externally mounted bearings between the screening chamber and motor drive, allowing all internals to slide freely from the shaft end for cleaning, screen changes or inspection. Wide spacing between the bearings, a large-diameter shaft and a flexible-shaft coupling combine to prevent vibration, even at high speeds under heavy, imbalanced loads, says the manufacturer. The screener is available with compliance to several U.S. and European sanitary standards, with nylon monofilament, woven wire or wedgewire screen cylinders. Configurations are offered for continuous inline operation with dilute-phase pneumatic conveying systems, as well as for gravity-fed applications. - Kason Corp., Millburn, N.J.
edlinks.chemengonline.com/6893-332
Etching creates a bondable fluoropolymer tubing
This company now offers onsite etching to create a bondable surface on PTFE, FEP and PFA (photo). Because the lubricity of the fluoropolymer tube surface hampers its bondability, etching is required to alter the tube surface in order to allow adhesion. Etching services are available on the inner or outer diameter, or both, of this company's products. In the process, etching chemicals are used to modify the surface of the fluoropolymer materials in order to enhance the bondability. The chemical reaction between the etch and the fluorine in the tubing eliminates the smoothness of the tube, stripping the fluorine and leaving the tube surface rough. Once the surface lubricity has been altered, the tubing can be bonded to almost any surface. Etching does alter the color of the tube and ranges from light to dark brown. The color, however, does not determine the strength of the etch. Unlike natural fluoropolymer tubing, etched tubing must be stored in black plastic bags to keep out light and retain the effects of chemical alteration. Offered in sizes from 0.004-4-in. dia., etched tubing is a custom, made-to-order product. - Parker-Texloc, div. of Parflex, Fort Worth, Tex.
edlinks.chemengonline.com/6893-333
An advanced unit now controls these freeze dryers
The benchtop "K" Series freeze dryers (photo, p.32D-2) will now be supplied with the latest, most advanced Sentry 2.0 controller. This microprocessor controller is designed to make operation intuitive and easy to monitor. A clear backlit synoptic LCD allows at-a-glance viewing of all functioning systems and their status. In addition, a graphic wave LED display enables quick and easy confirmation of temperature and vacuum status. Optional workstation software enables data collection and historical trending of the freeze-drying process. - SP Industries, Warminster, Pa.
edlinks.chemengonline.com/6893-334
Transfer powders safely with this system
Powdered products that need to be contained to avoid contamination to the workplace environment can be transferred by a self-contained Powder Transfer System (PTS; photo). Designed for products such as pharmaceuticals, fine chemicals and metal powders, the totally sealed pneumatic system requires no external filters or vents, and allows dust-free charging of powder directly into closed vessels, including those under vacuum or pressure. The system employs a sealed transfer vessel that is connected to the feed container and mounted on the vessel to be charged. Product is moved into the transfer vessel and then charged into the receiving vessel with no escape of dust or air into the environment. The PTS is equipped with four valves, one each for product inlet and outlet, and vacuum and pressure source. Inside the PTS cover is a membrane that can filter particles down to 1 µm. - De Dietrich Process Systems, Inc., Mountainside, N.J.
edlinks.chemengonline.com/6893-335
These barcode readers can be used in hazardous areas
Scanex (photo) is a complete family of barcode readers that is engineered for use in hazardous areas. Three primary models are available: the Dragon D101 is a cabled trigger-operated handheld scanner with a reading distance of 80-800 mm (a long-range option expands the range to 250-2500 mm); the Dragon M101 is a wireless trigger-operated handheld scanner with a maximum reading distance of 1,100 mm and a 50-m radio-transmission radius; and the Nano is a fixed-mount miniature scanner with a reading distance range of 100-750 mm and continuous-scan operation at a rate of 39 scans per second. The operating temperature for the Nano ranges from -20°C to 5°C. This unit is ideal for fixed-location scanning as on weighing platforms and conveyor systems. - Pepperl+Fuchs, Twinsburg, Ohio
edlinks.chemengonline.com/6893-336
These torque transducers require no manual adjustments
Suitable for control, laboratory and production uses, these compact, non-contact torque transducers have full-scale ranges from 25 to 10,000 lbf-in. Two accuracy grades are available: 0.2% (Code N standard performance) and 0.15% (Code C enhanced performance). The MCRT 48200V Series compact digital torquemeters (photo) also output ±10V or ±5V analogs of torque and engineering unit data via com port. The meters include software that interfaces with Windows-based computers to display engineering unit current, peak, valley and spread data; classify limits; and perform realtime plotting. The software will also save to a disk, store setup parameters and archive calibration history. - S. Himmelstein and Co., Hoffman Estates, Ill.
edlinks.chemengonline.com/6893-337
Screen powders in pneumatic conveying lines with this sieve
The Blow Thru Sieve (photo) enables processors to screen and transport material simultaneously and remove oversize contamination from powders during dilute-phase pneumatic conveying. The unit assembles and disassembles using a single tool, allowing for quick, simple cleaning between batches. The sieve is mounted on a mobile stand and so is portable for use at multiple onsite locations. The Blow Thru Sieve is available with materials and surface finishes approved for food applications. A variety of connections are available for compatibility with existing processes. - Russell Finex, Inc., Pineville, N.C.
edlinks.chemengonline.com/6893-338
A wireless system that can be used in hazardous areas
The SmartDisk wireless monitoring system (photo, p. 32D-5) has been certified as intrinsically safe for Class 1, Division 1 applications. This allows the battery-powered transmitters to be installed virtually anywhere in an industrial facility. The SmartDisk system is designed for monitoring pressure-relief devices, which are often installed in hazardous environments. This new approval allows the system to be applied whenever rupture disks, relief valves, tank vents, buckling-pin valves or explosion vents can be fitted with sensors to annunciate their activation. - BS&B Wireless, LLC, Tulsa, Okla.
edlinks.chemengonline.com/6893-339
This pressure gauge fits industry-standard panel hole cutouts
The latest addition to this company's line of industrial pressure gauges, the PBG Series (photo), monitors vacuum and positive system pressure up to 15,000 psi. The unit fits 65-mm panel hole cutouts, and tube-adapter ends provide for leak-tight connections and ease of installation. Additional features include: welded construction for high-integrity fluid system containment; crimped, tamper-resistant rings that provide a permanent seal of gauge case to lens; liquid filling as a standard for increased vibration resistance; and a socket restrictor for pulsation control. - Swagelok Co., Solon, Ohio
edlinks.chemengonline.com/6893-340
Achieve various levels of water quality with this filter
The Automated Disc Filter (ADF, photo) is an automatic, self-cleaning, plastic disc filter. In this system, water enters through an inlet pipe at the bottom of the filter housing, where "fin plate" blades force the water to enter the chamber with a vortex effect. This effect causes dirt particles to collect on the upper wall of the filter chamber, where they remain until the next flushing cycle. As the water flows from the outside of the disc stack to the inside, grooves on the discs catch the suspended material. Clean, filtered water flows of the the filter from the center outlet. The system is cleaned by reverse flow, which can be triggered by pressure differential, time, or both. - Amiad Filtration Systems, Oxnard, Calif.
edlinks.chemengonline.com/6893-341
Simplify operations with this new liquid-analysis platform
The Model 1056 single/dual input analyzer allows the user to choose from any combination of measurements: pH/ORP/ISE; resistivity/conductivity; percent concentration; chlorine (free, total, monochloramine, pH-independent free chlorine); oxygen; ozone and temperature. To simplify operation in the field, the Model 1056 features the largest high-contrast LCD display available on a line-operated instrument. Four process variables, or diagnostic parameters, are displayed simultaneously. The placement of variables on the screen is easily configured based on the user's requirements. Embedded predictive diagnostics provide warnings and faults when the sensors or instrument are not performing to specification. A push of the diagnostics button reveals troubleshooting and maintenance messages. - Emerson Process Management, St. Louis, Mo.
edlinks.chemengonline.com/6893-342
These filters combine the advantages of ceramics and polymers
This company has improved their membrane filtration designs with new polymeric compositions that enhance stability. They now offer highly resistant sanitary modules for food and pharmaceutical applications that can be cleaned at temperatures up to 80°C with a pH range of 3-14 for the OX-type Spira-Cel modules and a pH range of 0-12 for the OY type. The OY-type modules can be used for nanofiltration in the metal industry for the treatment of pickling or anodizing baths. The OX-type is designed more for the chemical industry. - Microdyn-Nadir GmbH, Wiesbaden, Germany
edlinks.chemengonline.com/6893-343
This drum storage unit instantly contains spills
Chem Trap (photo) is a reusable, instant containment system for chemical spills. The safety-orange colored unit has a 65-gal. capacity and a puncture-resistant base for storing drums. Optional accessories include a drain for transferring or storing liquids or linking several Chem Traps, a ground tarp and gravity-flow bags for more capacity. - Andax Industries LLC, St. Marys, Kan.
edlinks.chemengonline.com/6893-344
Pump difficult-to-handle materials with this peristaltic unit
The LPP pumps incorporate a unique, patented rolling design that eliminates friction, maximizes hose life and lowers energy consumption, says the manufacturer. The roller is mounted on a crankshaft that creates eccentric rotation during the 360-deg. operating cycle. These pumps can handle abrasive, corrosive, viscous or crystallizing media, and slurries with high-solid content. The LPP80 pump (photo, p. 32D-7) has a flow capacity of up to 40m3/hr and a maximum operating pressure of 7.5 bar. LPP peristaltic pumps are equipped with inline pipe connections, an optional hose-leak detection unit and a patented adjustment mechanism that sense hose wear when compression is readjusted. - Larox Flowsys Oy, Lapeenranta, Finland
edlinks.chemengonline.com/6893-345
These locknuts are proven to resist vibration
Suited for applications where shock, vibration, stress or environmental conditions cause fastener failure, the Security Locknut (photo) eliminates the need for traditional fastening systems, such as double nuts or serrated fasteners, and for costly processes such as wire-tying or welding. Known for its elliptical spring, steel-insert locking technology that radially locks onto a mating bolt or shaft, this company has made test-result data available to substantiate their claims about the product's resistance to vibration and fatigue. These results are available directly from the manufacturer as well as from their website. - Security Locknut Inc., Mundelein, Ill.
edlinks.chemengonline.com/6893-346
Measure viscosity in low-shear applications with this sensor
Designed to instantaneously measure samples of low- to mid-range viscosity fluids, this newly introduced sensor provides continuous, realtime, inline-viscosity measurements for process-control systems that require high resolution and accuracy. Using semiconductor technology, the BiODE acoustic sensor weighs only 4 oz., has no moving parts and is sealed so it can be completely immersed in the process stream where it is unaffected by vibration or flow conditions. The sensor simultaneously measures fluid viscosity from 1 to 500 cP and temperatures up to 125°C, and requires no field calibration. The sensor has an accuracy of 2%, reproducibility of 3% and repeatability of 1%. Custom options and configurations are available for specific industry applications and process requirements. - BiODE, Inc., Westbrook, Maine
edlinks.chemengonline.com/6893-347
This absorbent is dust free and sequesters acids, bases and oils
The Zorbent absorbent is used to pick up all liquids except concentrated HF in a swift, easy and safe process. Made up of 680-µm particles, the lightweight, dust-free adsorbent can be used in applications where dust is a nuisance. - MetaMatrix, LLC, Boulder, Colo.
edlinks.chemengonline.com/6893-348
Dry materials under uniform conditions with this unit
This dryer's modified design ensures that individual particles are treated for the same length of time under controlled conditions. The improved design is operating at various plants to dry capsules, pellets, beads and tablets to a final moisture or volatile level as low as 0.001%. The continuous rotary tray Turbo-Dryer (photo) provides: automatic control of the residence time and temperature for uniform output; gentle handling for minimum dust fines; containment of product, gases and odors, and for solvent recovery; continuous operation for greater production and low energy and operating costs. - Wyssmont Co., Fort Lee, N.J.
edlinks.chemengonline.com/6893-349
When space is limited, consider this flowmeter for solids
Although solid flowmeters based on centrifugal forces are commonly used in the CPI, space limitations often limit their applicability. The Baby FlowSlide has been developed to remove this limitation, and will be launched at Powtech. The system has a total height of only 400 mm and has a flow capacity between 50 and 5,000 kg/h. A larger version, the FlowSlide, extends the flowrate capacity to 100,000 kg/h. - Hall 9, Stand 505 - Hense Wägetechnik GmbH, Brilon, Germany
edlinks.chemengonline.com/6893-390
Systems for making and classifying fines
This manufacturer's equipment for production and classification of fine particles incorporate patented air classifiers and jet mills providing powdered materials as small as a few microns. The finest achievable products processed in the newly developed UCS classifier Series (photo) reach finenesses down to d97 of 1.5 micron. These materials are used for applications such as fillers, pigments, coatings and medical products. - Hall 7, Stand 635 - Comex AS, Rud, Norway
edlinks.chemengonline.com/6893-391
A bursting disk for low-pressure applications
The Oseco ultra-low pressure Prolp rupture disk (photo) operates in very low-pressure vessels, where equipment-operating costs are a key consideration. It has a fully open, perimeter-scored design, which uses Oseco's computerized load-cell technology. This highly specialized disk is especially suited forlow-pressure applications involving most gases, vapors or liquids. Potentially dangerous pressures are relieved with the disk's high operating ratio of 95%, protecting personnel and equipment. When used as relief-valve isolation, the disk can also be used to prevent fugative emissions. - Hall 9, Stand 405 - Gefa Processtechnik GmbH, Dortmund, Germany
edlinks.chemengonline.com/6893-392
Destroy H2 in exhaust before it becomes hazardous
Electro-deionized and electrolytic ozone generation are widely used for water treatment, but both processes generate hydrogen. With the patented catalytic exhaust-gas converter Hydrokat (photo), potential explosive air-H2 mixtures are eliminated. The heart of the device is a catalytic combustion with an automatic supply of O2 and integrated temperature regulator; in operation the H2 is safely burned to form water. The system takes up less space than commonly used ventilation systems, and has no moving parts that can trigger an explosion. - Hall 12, Stand 236 - Christ Water Technology Group, Aesch, Switzerland
edlinks.chemengonline.com/6893-393
For corrosion and abrasion resistance, consider ceramics
This firm is continuing the tradition for fine ceramic products for which the city of Siegburg has been know since the middle ages. Ceramic manufactured by ETEC is used for wear and corrosion protection in the process and conveying sectors, with products (photo) shaped as tiles, bricks, monolithic components and composite construction. - Hall 10, Stand 222 - ETEC Gesellschaft für Technische Keramik mbH, Lohmar, Germany
edlinks.chemengonline.com/6893-394
This feed controller gets smarter
Launched at Powtech, K-Vision is a new operator interface for multiple- and single-line feeder systems using the K-Tron Control Module (KCM). K-Vision supports multiple languages, including Chinese, and features a selectable quad screen. The company is also introducing its next generation of SmartConnex feeder controls, the KMC, which harmonizes the full functionality of the two previous levels of controls into a single compact housing. Among the other products on hand is the newly enhanced MT12 Micro Feeder (photo, p. 32I-1), which is designed for feedrates as low as 20 g/h. The latest design features of the MT12 include an inverted negative-cone hopper to aid material flow and a redesigned bottom agitator to reduce residues. - Hall 7, Stand 372 - K-Tron, Niederlenz, Switzerland
edlinks.chemengonline.com/6893-395
Cool very hot solids with this innovative system
The new High Temperature Bulk Powder Cooling Model (photo), launched at Powtech, has an innovative design using horizontal water-cooled tubes that minimizes thermal stresses and accommodates thermal expansion, says the manufacturer. As a result, the system is capable of cooling bulk solids with temperatures up to 1,000°C. Compared to the alternative plate design, the new design has the benefit that the geometry of the tube is perfectly uniform and provides an even temperature distribution throughout the tube wall, thus avoiding hot spots and local stresses, says the firm. The high-temperature model is suitable for processing bulk solids from metallurgical processes for metal recovery, reactor discharges in the petrochemicals industry, boiler ash in fluidized-bed combustion chambers and catalyst production processes. - Hall 9, Stand 418 - Bulkflow Technologies, Inc., Calgary, Alberta, Canada
edlinks.chemengonline.com/6893-396
Empty bulk bags with this redesigned discharge station
The BagMaster bag-discharge station (photo) is now available for bulk bags with or without liners. The main redesign is a novel massage ring mechanism, derived from the company's FlexWall principle, which results in mass flow, uniform discharge and complete emptying-out, even of poorly flowing ingredients. Also redesigned is the optional docking system for connection and "tautening" of the bulk bag or liner outlet spout. Now called QCD (quick connect docking) system, it allows dust-tight bag docking. - Hall 7, Stand 166 - Brabender Technologie KG, Duisburg, Germany
edlinks.chemengonline.com/6893-397
If it melts, this machine can pastillize it
By means of a special drop-forming device, the Rotoform, droplets of molten product are fed to a continuously running steel belt, which is cooled by water from below to rapidly solidify the product. The droplets are then discharged as solid pastilles at the end of the cooling system. Rotoform units handle capacities from 20 kg/h up to 12 m.t./h and are able to process products with viscosities of 1 to 50,000 cP at temperatures up to 320°C. Typical products include sulphur, resin waxes, pitch, fats and fine chemicals. Food products such as chocolate, edible fats and chewing-gum base can also be processed. Pastilles can be made with diameters from 1 to 15 mm. - Hall 9, Stand 238 - Sandvik Process Systems, Fellbach, Germany
edlinks.chemengonline.com/6893-398
This high-pressure processor achieves very high shear rates
M-110EH-30 (photo) is the latest version of this firm's laboratory Microfluidizer high-shear processor. Designed to operate at process pressures of up to 30,000 psi, the unit is suitable for producing nano-suspensions and nano-emulsions as well as for cell disruption. Shear rates that are "orders of magnitude" greater that alternative fluid processors and mixers can be delivered to the product stream in the unit's fixed-geometry interaction chamber, says the firm. The machine provides an average flowrate of 320 mL/min (with water) and can handle batch sizes of up to several gallons. - Hall 12, Stand 140 - Microfluidics, Newton, Mass.
edlinks.chemengonline.com/6893-399
Consider using a fluidized bed for agglomoration
This company will display a continuous fluidized-bed (FB) pilot plant (photo) from its technology center to demonstrate the latest innovations in FB agglomeration and granulation. Among the new design features are the system's nozzle technology, exhaust-air filtration media, start and shutdown procedure, sifting of fine particles, measuring of FB height and corresponding targeted adjustment of retention time, cleanability and compliance with ATEX and cGMP regulations. Units with throughputs of 50 to 2,000 kg/h are available. - Hall 11, Stand 221 - Heinen Drying GmbH, Varel, Germany
edlinks.chemengonline.com/6893-400
A secure, aseptic valve for potent transfers
The PSL ChargePoint split butterfly valve (photo, p. 32I-4) is claimed to be the world's first aseptic containment valve. The device provides a flexible and secure system for the transfer of potent powders throughout the entire drug-manufacturing process. The patented technology enables repeated sterile powder transfers without compromising containment. The valve disks are purged with vaporized hydrogen peroxide to sterilize the surfaces, protecting both the operator and the product. The valve is available in 4- and 6-in. sizes with construction materials either 316L or C22. - Hall 8, Stand 206 - Powder Systems Ltd., Liverpool, England
edlinks.chemengonline.com/6893-401
A safe way to continuously dose powders into a process stream
The PowderFlex (photo) allows the precise and continuous dosing of powders (>1g) with an accuracy of ±2-3%. The system consists of two variable dosing chambers that are alternately filled and emptied by means of vacuum and pressure, which has the effect of developing a continuous product flow. The size, and thus capacity, of the dosing chambers can be adapted automatically to each process, depending on the amount of product that has to be dosed or transferred. Bulk solids can be gently transferred under an inert atmosphere, which allows the charging of inert process devices with explosive powders. The unit is easily cleaned in place. - Hall 9, Stand 425 - Dietrich Engineering Consultants S.A., Ecublens/Lausanne, Switzerland
edlinks.chemengonline.com/6893-402
A new way to electrically ground piping systems
The new earthing bridge (photo) can be installed on initial and retrofit installations of pipe systems for electrical grounding. A secure installation is achieved after a few simple steps. The company's pull-ring connection enables existing systems to be retrofitted without welding. The EXAM-certified innovation is claimed to be unique on the market, and is also reasonably priced, says the firm. - Hall 9, Stand 555 - Fr. Jacob Söhne GmbH & Co., Porta Westfalica, Germany
edlinks.chemengonline.com/6893-403
This mill makes pellets from powders
This manufacturer will be exhibiting a Paladin-Type pellet mill, which converts loose material into a compressed product. The system applies pressure and heat to the substance, causing its density to increase by up to a factor of ten, resulting in pellets with a diameter from 3 to 30 mm. Systems are available with motors having a power from 75 to 500 kW. Typical applications include the production of pellets from recycling of plastics, stabilizers, chemicals, electronics waste and polyurethane foam (from refrigerators) as well as for converting byproducts from wood into pellets for fuel. - Hall 9, Stand 235 - Andritz Sprout, AG, Mettmann, Germany
edlinks.chemengonline.com/6893-404
Determine powder-flow behavior with a single instrument
With the Revolution powder analyzer (photo), operators can determine a powder's process behavior by measuring - in one system - the interactions of the many factors (size, density, moisture content, chemical composition) that normally had to be measured independently from each other. Material to be analyzed is placed into a rotating drum. As the drum rotation rate is gradually increased (over the range from 0.1 to 200 rpm), a digital camera using back-light illumination takes images at up to 30 frames/s. Software then analyzes the collected images to determine how the powder's behavior changes over time. All powder-behavior tests, including flowability, granulation, caking and fluidization, can be performed in a single device. - Hall 7, Stand 121 - PS-Prozesstechnik GmbH, Basel, Switzerland
edlinks.chemengonline.com/6893-405
Measure high particle concentrations without dilution
The Welas 2100 FL (photo) is an aerosol spectrometer that uses scattered light to simultaneously determine particle size and concentration. The unit features the world's smallest sensor, and the combination of white- and scattered-light detection in a 90 deg. angle enables the particle diameter to be determined in a gas or a liquid - without the use of mathematical algorithms. Because of the small optical volume used for the measurement, the unit is able to measure very high concentrations (up to 100,000 particles/mL) without having to dilute the sample. The device has a measurement range from 0.5 to 40 µm (Latex in water). - Hall 10, Stand 214 - Palas GmbH, Karlsruhe, Germany
edlinks.chemengonline.com/6893-406
Filtration for all stages of pharmaceutical production
This firm's filtration units have proven themselves in the pharmaceutical industry, where they are used in production and technology rooms. Custom-made systems are designed for each individual step in the production line, including weighing, pneumatic conveying, mixing, granulating, drying, screening, batching pelletizing, coating and packaging, as well as complete, centralized dust-suction units (photo). The company also provides ATEX training courses and consultation for safely handling combustible types of dusts. Hall 7, Stand 537 - Herding GmbH, Filtertechnik, Amberg, Germany
edlinks.chemengonline.com/6893-407
Disperse more powder into liquids with this unit
The ViscoTron dispersion device is able to incorporate powders into a liquid to a concentration up to 50%. With a flowrate of between 4,000 and 15,000 L/h, the unit provides a powder throughput of up to 4,000 kg/h. Extremely difficult-to-wet powders can be processed in a single pass, says the firm. The unit can be fed from silo or the BigBag. Versions are available with clean- and steam-in-place capabilities. - Hall 9, Stand 438 - YtronProcess Technology GmbH & Co. KG, Bernau/Chiemsee, Germany
edlinks.chemengonline.com/6893-408
Achieve an absolute cutoff with this classifier
The Turbo-Screen Air Classifier (photo) provides continuous, precise screening of dry materials, especially in the finer particle sizes. Available in screen sizes from 60 to 600 mesh, the system provides efficient separation of particles ranging from 300 to 15 microns. The unit features a rotating air wand that blows a knife-edge sheet of compressed air against the back of the screen, which prevents oversize and nearsize particles from blocking the screen openings. Unlike standard air classifiers, the Turbo-Screen delivers an "absolute cut", claims the firm, which opens up new possibilities for fine-particle separation in a wide variety of industries, including those producing food, chemicals metals, plastics and ceramics. - Hall 9, Stand 561 - Sweco Europe S.A., Nivelles, Belgium
edlinks.chemengonline.com/6893-409